Noise has expanded its home audio lineup with the Noise Homestage 5.2.4, a home theatre system built around a 5.2.4-channel configuration and True Dolby Atmos certification. The system’s more notable specification is its combination of dedicated surround channels, dual subwoofers, and physical up-firing height channels. According to Noise’s official product page, the system delivers 700W of peak output power, a specification that should not be confused with 700W RMS.

The setup is available in Black and Silver finishes and features a matte metallic design, along with a digital display on the soundbar. The package includes the soundbar, two subwoofers, two rear satellite speakers, a remote control, power accessories, an AUX cable, and the user manual.

5.2.4-Channel Setup With Dual 6.5-Inch Subwoofers

The defining feature of the Noise Homestage 5.2.4 is its channel configuration. The “5” represents three front and two rear channels, while “2” refers to the two dedicated subwoofers. The final “4” represents four up-firing height channels. Noise says these height channels are positioned across the soundbar and rear satellites, allowing height effects to be produced from both the front and rear of the room.

The system also includes two 6.5-inch wired subwoofers. Noise says the dual-subwoofer arrangement is designed to distribute low-frequency output across the room. This remains a manufacturer-stated design claim. The subwoofers themselves are wired, while the rear satellite speakers establish a wireless link with the soundbar.

The soundbar uses four 2-inch drivers alongside two 52x75mm drivers, while each rear satellite carries four 2-inch drivers. This gives the system a hardware configuration aimed at separating front, rear, low-frequency, and height-channel duties.

700W Peak Output and True Dolby Atmos

Noise has rated the Homestage 5.2.4 for 700W peak output across the soundbar, two subwoofers, and two rear satellite speakers. The distinction between peak and RMS power is important here, as the official specification does not describe the system as delivering 700W RMS.

The system also carries True Dolby Atmos certification and uses four physical up-firing drivers for height effects. Noise says compatible Atmos content can be used through HDMI eARC or Optical connections, with the TV configured to pass through compatible Dolby Atmos audio. The up-firing design relies on sound reflecting from the ceiling, meaning room characteristics and speaker placement can influence the resulting height effect. Noise specifically recommends a flat, hard ceiling and keeping the speakers clear of shelves or cabinets above them.

Wireless Rear Satellites With Up-Firing Height Channels

The two rear satellite speakers connect to the soundbar wirelessly, which reduces the need for an audio cable running between the rear speakers and the main soundbar. However, the satellites still need to be connected to power adapters, so the HomeSage 5.2.4 should not be described as a completely wireless home theatre system.

Noise also provides independent rear-speaker volume control. Users can adjust the rear satellite volume separately from the main volume using the remote, which can be useful when fine-tuning the surround balance for a particular room. The company also supports wall mounting for the satellite speakers and recommends positioning them roughly at seated ear level around the seating area.

HDMI eARC, Bluetooth 5.3 and Other Connectivity

For connectivity, the Homestage 5.2.4 supports HDMI eARC/ARC, Optical, USB, AUX and Bluetooth 5.3. Noise lists a Bluetooth range of approximately 8–10 metres. HDMI eARC/ARC provides the primary TV connection, while Optical offers another route for compatible audio setups.

The USB port can also be used for local music playback, although Noise specifies that the system supports MP3 files through USB. Bluetooth provides a more straightforward option for streaming music from smartphones, tablets, and other compatible devices.

12-Level Bass and Treble Controls

The Homestage 5.2.4 offers three EQ modes: Movie, Music and News. In addition, both bass and treble can be adjusted independently across 12 levels. The remote also includes dedicated controls for adjusting the rear satellite volume.

This gives the system more manual control than a setup that only offers preset sound profiles. Users watching films, listening to music or prioritising dialogue can switch between the available EQ modes and make further adjustments to bass, treble and rear-channel volume.

Noise Homestage 5.2.4 Price in India

The Noise Homestage 5.2.4 has been reported at a launch price of ₹24,999 in India. However, pricing information across third-party listings can vary; one current product-indexing page lists the model at ₹27,999. For that reason, the official Noise listing or the price displayed at checkout should be treated as the final authority for the current selling price.

The broader Indian home-theatre segment also includes several 5.2.4 and Dolby Atmos systems from brands such as boAt and other manufacturers, making the configuration itself more relevant to evaluating the Homestage 5.2.4 than its wattage figure alone. Overall, the Noise Homestage 5.2.4 enters the home-audio segment with a specification-heavy setup: a 5.2.4-channel architecture, two 6.5-inch subwoofers, four up-firing height channels, wireless rear satellites, True Dolby Atmos and 700W peak output. Its positioning is therefore less about the headline wattage and more about combining multiple physical speaker channels and room-oriented controls in a single home theatre package.

(Source)